Peak Fly Tying

Sort by Position: Low to High
40 Per Page
View larger image
PEAK01
Peak Premium Fly Tying Tool Kit
£49.99

In stock
+ −
View larger image
PRV-G2
Peak Rotary Vice - Pedestal Base
£218.00
The large stable pedestal base (PRV-G2 model) will hold this vice where you set it, and the non-marking feet protect the surface you set it on.
In stock
+ −
View larger image
PRV-G2 Kit
Peak Rotary Vice - Tying Kit
£248.00

Premium Fly Tying Kit.

x1 Peak Rotary Vice

x1 Pic N Brush

x1 Accessory Shaft

x1 Tool Post Caddy

In stock
+ −
View larger image
PTL
Peak LED Fly Tying Lamp
£179.00

PEAK’s LED powered tying light is the best portable lighting solution around. The LED light source runs cool and provides a wide angle of light to illuminate your entire tying area with minimal power consumption.

In stock
+ −
PTFV-HD
View larger image
PTFV-HD
Peak Tube Fly Vice Head
£138.00
PEAK’s Rotary Tube Fly Vice uses a chuck with no collets that require change out, maximizing convenience and minimizing set-up time.
In stock
+ −
MDG-1
View larger image
MDG-1
Peak Rotary Vice Midge Jaw
£43.50
PEAK Midge Jaws undergo the same hardening and tempering process as our highly acclaimed standard jaw. PEAK midge jaws are specifically profiled to allow more access to tie on smaller hooks. Not recommended for extended use with hook wires larger than a #16 dry fly hook. Black oxide finish reduces glare in the immediate area of your hook.
In stock
+ −
STL-1
View larger image
STL-1
Peak Rotary Vice Large Jaw
£44.99

PEAK Saltwater Jaws undergo the same hardening and tempering process as our highly acclaimed standard jaw. 

PEAK Saltwater jaws are specifically profiled to allow more access to tie on larger hooks. A rounded end helps grip larger hooks and hides hook points well.

Black oxide finish reduces glare in the immediate area of your hook.

In stock
+ −
PRVLIRS
View larger image
PRVLIRS
Peak Large Hook Conversion Head
£117.00

PEAK’s custom engineered, award winning revolutionary hook holding technology.

The Large Hook Conversion Head allows a hook to be held under a ‘drawbridge’ rather than between two parallel surfaces.

In stock
+ −
View larger image
CMP-1
Peak C-Clamp
£47.00
Reverse the lower rabbeted jaw to get a grip range from 2-1/4″ to 11/16″. Jaws ride on precision guide rods holding the jaw faces parallel, there is no rotating clamp screw bearing against your table to damage the finish.
In stock
+ −
View larger image
PNB-M
Peak Pick 'N' Brush
£13.99
PEAK’s combo dubbing tool, the Pick-N-Brush is almost a necessity on any bench. It incorporates a nylon dubbing brush, bodkin needle and half hitch tool in one package. The nylon brush is more gentle on thread and hackle than metal brushes. The Pick-N-Brush allows you to carry less tools for more functions.
In stock
+ −
SFT-L
View larger image
SFT-L
Peak Accessory Shaft
£11.50
PEAK’s Accessory Shaft is a unique and very useful accessory. It provides a place to mount items such as a light or profile plate near your work area, but not on your vice. Compatible with both PEAK’s Pedestal Base and C-Clamp, the Accessory Shaft will accept any accessory designed to mount to a 3/8″ diameter shaft.
In stock
+ −
RSR-1
View larger image
RSR-1
Peak Riser
£32.99
The PEAK Riser will work with a Pedestal Base or C-Clamp (in fact it is compatible with any base or clamp that fits a 3/8″ diameter vice shaft) and will accept any vice having a 3/8″ diameter shaft. The Riser allows you 1-3/4″ additional height adjustment. Leaving the riser attached to your vice and disassembling it from the Pedestal Base will leave you with a flat base for easier transportation.
In stock
+ −
ARM-D
View larger image
ARM-D
Peak D-Arm - Horizontal Rotary Handle
£14.99
If you prefer a horizontal handle to a vertical handle, PEAK’s D-Arm may be just the accessory you need. Easily assembled with the included tool, this rotating handle will “turbo-charge” your tying. The freely rotating shaft allows you to rotate your vice without having the handle spin in your fingers.
In stock
+ −
CLP-M
View larger image
CLP-M
Peak Material Clip
£11.99

Great tool for clamping material when tying large long patterns.

A perfect fit on a PEAK vice.

Tension spring provides excellent grip.

In stock
+ −
BOB-1
View larger image
BOB-1
Peak Bobbin Rest Assembly
£23.99
The PEAK Bobbin Rest Assembly is fast and easy to adjust and fits any vice with a 3/8″ diameter shaft.
In stock
+ −
PST-C
View larger image
PST-C
Peak Tool Post Caddy
£9.20
Here’s a useful accessory to help you stay organized and increase your tying output. No more looking for lost tools hidden under your materials, or that have rolled off on the floor. Hang your essential tools right next to your vice, out of the way, but there when you need them. Fits any 3/8″ shaft such as your PEAK Vice or PEAK Accessory Shaft.
In stock
+ −
PRF-1
View larger image
PRF-1
Peak Profile Plate
£24.99
The PEAK Profile Plate provides a high contrast background allowing you to easily observe the details of your fly regardless of any “visual clutter” that may accumulate on your tying table. The end result is you will find you can tie longer and more comfortably and accurately.
In stock
+ −
View larger image
BRS-1
Peak Brass Screw Kit
£21.99

Machined brass screws, ideal for use on the PEAK Rotary Vice.

The brass screws add strength to grip and are perfect for the avid tyer.

2 SCREWS PER PACK

In stock
+ −
View larger image
PCH-1
Peak Vice Travel Pouch
£32.99
The Travel Pouch has a heavy duty outer shell of tough Cordura for years of use.
In stock
+ −